Construction requirements for wall covering:

1. Check that the wall surface is clean and flat before paving, and the surface of the wall skin is not loose or falling off.
2. Use special tools for adhering to the wall cloth, among which it is best to use a professional imported wall cloth knife.
3. Roll and brush the wall base film on the wall first, and adjust the seamless wall covering glue according to the proportion.
4. After the base film is dry, roll the wall covering glue from a certain dark corner of the wall. Generally, press the roll to brush one wall (roll up and down evenly) and then start to stick the wall covering.
5. Straighten the wall covering along the wall, the height of the upper side is the same as the height of the wall, and the whole roll of wall covering shall be padded on the top of the skirting line with an object at the lower end.
6. Roll the wall cloth and use a scraper to scrape the wall cloth on the wall, the order is from the inside to the side, the wall cloth is aligned up and down, and then continue to pave in order.
7. If the internal angle is straight, the above rolling construction can be continued without cutting. If the inner corner is not straight, it can be lapped and cut at the inner corner.
8. If two people cooperate, the speed will be faster. You can measure the length from the inner corner to the inner corner, leaving a little room for the cloth. After the cloth is cut, the two ends are straightened from top to bottom, and from the inside to the side. .
9. After the whole house is pasted, perform a comprehensive inspection and find that there are bubbles or bubbling that can be solved with a household steam iron.